Cable de carga USB DeLOCK 3 en 1 Type-A a Micro-USB / 2 x USB Type-C 1 m

The DeLOCK USB Charging Cable 3 in 1 Type-A to Micro USB / 2 x USB Type-C 1 m is a multi‑connector charging cable designed to power and charge a range of mobile devices. With a standard USB A plug on one end and two outputs (Micro USB‑B and two USB Type‑C connectors) on the other, the cable supports USB 2.0 and delivers stable power up to 3 A. The 1 m length and available colours make it suitable for everyday use at home, in the office or on the go.

Advantages

This 3 in 1 charging cable reduces cable clutter by combining Micro USB and two USB Type‑C connectors in a single lead, so you can charge several device types without carrying multiple cables. The cable uses a 22 AWG gauge to support a reliable power supply up to 3 A. Robust textile braiding, reinforced strain reliefs and metal connector housings increase durability and make the cable suitable for frequent use.

Suitable for

• Charging smartphones with Micro USB‑B or USB Type‑C ports
• Powering tablets and portable devices that accept USB Type‑C or Micro USB
• Use with USB A power adapters, power banks and car chargers

Key specifications

• Brand: DELOCK
• Model / MPN: 87882
• EAN: 4043619878826
• Connector 1: USB A
• Connector 2: Micro USB‑B and 2 x USB Type‑C
• USB version: USB 2.0
• Cable length: 1 m
• Cable gauge: 22 AWG (supports up to 3 A)
• Available colours: Black, Green, Blue

How to use

Connect the USB A plug to a compatible USB power source such as a wall charger, power bank or computer USB port. Choose the appropriate output connector (Micro USB‑B or one of the USB Type‑C plugs) and insert it into the device’s charging port. Ensure the connector is aligned correctly and push gently until it seats. Remove the cable by pulling the plug, not the cable, to avoid stress on the strain relief.

Recommendations

For optimal performance, use a power adapter rated to provide sufficient current for your device and avoid bending the cable sharply near the ends. Inspect connectors periodically for damage and replace the cable if the textile shielding or connector housings show signs of wear.