Cable de conexión blindado Digitus 4K HDMI AOC 10m 2.0 14,4 Gbit/s

The Digitus 4K HDMI AOC Armored Connecting Cable 10m (AK-330130-100-S) is an active hybrid HDMI cable combining copper and fiber optics to transmit uncompressed video and audio signals over long distances. It supports HDMI 2.0 and HDCP 2.2, delivers up to 14.4 Gbit/s bandwidth and a maximum resolution of 4K (4096 × 2160) at 60 Hz. The cable has a slim outer diameter (approx. 5.2 mm) and an armored steel and aramid fiber design that improves mechanical protection. When not connected, the HDMI plugs are covered by screw-on protective sleeves rated to IP68, increasing durability for professional use.

Advantages

The hybrid AOC construction enables high bandwidth with low weight and a tight bending radius while preventing electromagnetic interference. Active electronics preserve the full HDMI signal spectrum and support uncompressed audio and EDID transfer with low latency. The steel and aramid fiber reinforcement makes the cable crush- and puncture-resistant, and the IP68-protected connector sleeves keep the contacts safe when the cable is not in use. Plug & Play operation provides immediate use without additional setup.

Suitable for

• AV installations at trade shows and events
• Long-distance HDMI connections between source devices and displays
• Professional presentations and conferences
• Home theater systems requiring 4K/60Hz over 10 m

Key specifications

• Brand: DIGITUS
• Model / MPN: AK-330130-100-S
• EAN: 4016032483823
• Cable length: 10 m
• Connectors: HDMI Type A to HDMI Type A
• HDMI version: 2.0
• Maximum resolution: 4096 × 2160 @ 60 Hz (4K/60Hz)
• Bandwidth: up to 14.4 Gbit/s
• Construction: hybrid copper + fiber optic; steel and aramid fiber reinforcement
• Outer diameter: approx. 5.2 mm
• Color: Black
• IP rating (connector sleeves): IP68

How to use

Connect the HDMI Type A plug on one end of the cable to the HDMI output of your source device (e.g., Blu-ray player, media player, PC) and the other HDMI Type A plug to the input of your display or AV receiver. Ensure the protective screw-on sleeves are removed from the ends before connecting and reattach them when the cable is disconnected. The cable is active and supports Plug & Play, so no additional drivers or power supply are required for standard operation.

Recommendations

For reliable performance, avoid sharp folding or kinks beyond the specified bending radius, keep connectors clean and reattach the protective sleeves when not in use. Use the cable in environments where IP68 protection for disconnected connectors is beneficial, such as trade fair setups or outdoor events with appropriate shelter.