Cable de conexión de antena ShiverPeaks 10 m RG59U con conectores macho metálicos cromados

The Antenna Connection Cable ShiverPeaks 10m RG59U with Chrome Metal Connectors is a 10-metre coaxial cable intended for transmitting radio frequency (RF) signals and video between aerials, set-top boxes, televisions and radio receivers. The cable uses RG59U construction with a characteristic impedance suitable for common analogue and digital AV installations, and comes fitted with chrome-plated metal connectors that provide a reliable mechanical and electrical connection for home or small professional systems.

Advantages

The RG59U core offers the standard impedance required for many video and RF applications while maintaining a compact diameter for flexible routing. Chrome metal connectors improve corrosion resistance and ensure a firm threaded connection to devices, reducing intermittent signal loss due to poor contact. With a 10 m length, the cable allows placement flexibility of equipment without the need for signal extenders in short-to-medium runs.

Suitable for

• Connecting an external aerial to a TV or set-top box
• Linking RF outputs from tuners or radio receivers to amplifiers or recorders
• Short to medium indoor cable runs in living rooms, bedrooms or small AV racks
• Temporary installations and testing where a reliable coaxial connection is required

Key specifications

• Cable length: 10 metres
• Cable type: RG59U coaxial
• Connector material: chrome-plated metal
• Impedance: 75 ohm nominal (suitable for video/RF)
• Usage environment: indoor AV and RF installations

How to use

Ensure both devices are powered off before connecting. Screw the chrome metal connector onto the threaded antenna or receiver port until it is hand-tight to avoid damaging the connector. Route the cable avoiding sharp bends, pinches and sources of strong electromagnetic interference. If a wall pass-through is required, use an appropriate grommet or wall plate and secure the cable to prevent strain on the connectors. After connection, power the devices and check signal reception quality; tighten connectors slightly if intermittent loss appears.

Recommendations

For best performance, keep the cable run as short as practical, avoid coiling excess cable tightly, and use a shielded junction or distribution amplifier for longer runs or when splitting signals to multiple devices.