Cable de conexión de fibra óptica BlueOptics SFP2122BU10MM 10 m LC a SC G.657.A1 monomodo amarillo

BlueOptics SFP2122BU10MM is a 10-metre singlemode fibre optic patch cable with an LC connector on one end and an SC connector on the other. The cable uses G.657.A1 bending‑insensitive singlemode fibre and features a yellow outer jacket that identifies it as singlemode. It is designed for indoor backbone, patch panel and equipment connections where low bend loss and stable singlemode transmission are required.

Advantages

The G.657.A1 fibre construction reduces loss caused by tight bends and routing in confined spaces, improving link reliability in cabinets and behind equipment. The LC-to-SC termination provides compatibility with a wide range of transceivers, adapters and legacy interfaces. A 10 m length offers flexibility for medium-distance internal routing without additional splices, while the yellow jacket simplifies identification in mixed cable environments.

Key specifications

How to use

Route the cable along the planned path avoiding sharp edges and excessive torsion. Insert the LC connector into the LC adapter or transceiver port and the SC connector into the SC adapter or device port until each connector clicks or seats firmly. Ensure that connector endfaces are clean prior to mating by inspecting and, if necessary, cleaning with appropriate fibre‑optic tools. Secure the cable in the rack or tray to prevent strain on the connectors and maintain bend radii consistent with G.657.A1 recommendations.

Recommendations

Inspect and clean connector endfaces before installation, maintain proper bend radius to preserve low loss behaviour, and avoid repeated mating cycles beyond manufacturer guidance to ensure long‑term performance.