Cable de extensión DisplayPort Montaje en panel DeLOCK 87098 8K 60 Hz 3 m

The DeLOCK DisplayPort extension cable panel-mount 87098 allows extending a DisplayPort connection and installing a female DisplayPort outlet in an accessible location. The cable is 3 m long with a 7 mm diameter and is fitted with DisplayPort connectors on both ends. The female port can be fixed using two screws to a slot bracket, cable duct or enclosure with a compatible opening, providing a tidy and practical connection point for monitors and other DisplayPort devices.

Advantages

The cable supports DisplayPort resolutions up to 8K at 60 Hz and offers a 3 m length for flexible routing. The panel-mount female port can be secured with two screws to provide a stable, accessible connection. Its black colour and slim profile suit integration into various installations while maintaining reliable signal transmission between devices.

Suitable for

• Extending DisplayPort connections between PC graphics cards and monitors
• Mounting a DisplayPort outlet on slot brackets or enclosures
• Use in workplaces, home offices and AV cabinets where an accessible port is required

Key specifications

• Brand: DELOCK
• Model / MPN: 87098
• EAN: 4043619870981
• Connector 1: DisplayPort
• Connector 2: DisplayPort (panel-mount female)
• Cable length: 3 m
• Cable diameter: 7 mm
• Product colour: Black
• Maximum supported resolution: 8K @ 60 Hz

How to use

Secure the female panel-mount DisplayPort connector into the slot bracket, cable duct or enclosure opening using the two mounting screws. Connect one end of the cable to the installed panel-mount connector and the other end to the source or display device with a DisplayPort port. Route the 3 m cable to avoid sharp bends and protect it from mechanical damage. Verify the connected devices’ DisplayPort settings and resolutions to ensure proper signal output.

Recommendations

For stable 8K@60 Hz performance, use with DisplayPort-compliant source and display devices and avoid running the cable alongside high-power electrical lines. Ensure the panel cut-out matches the connector dimensions before mounting and tighten mounting screws securely but without excessive force.