Cable de fibra óptica InfiniBand BlueOptics ATZ1-BO 10 m SFP+ conector macho/conector macho

The BlueOptics ATZ1-BO InfiniBand/fibre optic cable 10 m SFP+ Male/Male is a 10-metre multimode fibre assembly with SFP+ connectors on both ends, designed for high-speed links in data center and enterprise network environments. It provides a factory-terminated connection intended to support low-latency, high-bandwidth transmission between SFP+ ports, ensuring consistent optical performance over the specified distance. The cable is suited for short-range InfiniBand and fibre channel links where a compact, pre-terminated optical solution is required.

Advantages

The BlueOptics cable offers predictable optical performance with standardized SFP+ terminations for straightforward plug-and-play installation. Its 10 m length balances flexibility and signal integrity for rack-to-rack or equipment-to-equipment connections while limiting the need for splices or additional transceivers. The male-to-male SFP+ configuration simplifies direct connections between compatible SFP+ ports without adapters, and the factory-polished connectors reduce insertion loss and reflectance compared with field-terminated alternatives.

Suitable for

Key specifications

How to use

Connect each SFP+ end of the cable to the corresponding SFP+ ports on networking devices such as switches, host bus adapters, or transceivers. Ensure that both devices support optical SFP+ links and that any required transceiver modules or port settings are correctly configured. Route the cable to avoid sharp bends and mechanical strain; maintain the minimum bend radius recommended for multimode fibre to preserve signal quality. Verify link status and speed through device LEDs or management interfaces after insertion.

Recommendations

Handle the cable by the connector bodies and avoid touching the optical endfaces. Keep protective dust caps on unused connectors until installation and use appropriate fibre cleaning tools if contamination is suspected. For optimal performance, confirm compatibility of SFP+ ports and transceiver modules with multimode fibre, and plan cable routing to minimize physical stress and bend radius violations.