Cable de fibra óptica ROLINE 21.15.9470 0,5 m E-2000 (LSH) 2x LC

The ROLINE 21.15.9470 is a 0.5 m OM4 fibre optic patch cable with an E-2000 (LSH) connector on one end and two LC connectors on the other. Designed for short-reach, high-bandwidth links, this multimode cable uses a 50 µm core to support high-speed data transmission with low attenuation and stable signal integrity. It is suited to structured cabling in data centers, telecom racks and other networking environments where compact, reliable fibre connections are required.

Advantages

The OM4 multimode construction and 50 µm core diameter enable higher modal bandwidth and improved performance over standard multimode fibres for short to medium distances. The E-2000 (LSH) connector provides a secure, dust-protected mating interface while the duplex LC connectors offer a compact footprint for high-density panel installations. The 0.5 m length reduces excess cable slack in tight equipment layouts and helps maintain orderly cable management.

Suitable for

• Connecting transceivers or patch panels to network switches in data centers
• Interfacing telecom equipment and distribution frames
• Short-distance high-bandwidth links within server racks and patch cabinets

Key specifications

• Fibre type: OM4 multimode
• Core diameter: 50 µm
• Cable length: 0.5 m
• Connector A: E-2000 (LSH)
• Connector B: 2 × LC (duplex)
• Application: Short-reach high-bandwidth multimode links

How to use

Route the cable between the two connection points, ensuring connectors align with the appropriate ports. Insert the E-2000 (LSH) connector into the corresponding E-2000 receptacle and the duplex LC connectors into the LC ports, taking care to avoid exceeding the minimum bend radius of the fibre. Secure the cable in place using cable management hardware where available and avoid sharp bends, kinks or crushing forces that could degrade optical performance.

Recommendations

Inspect connector endfaces before insertion and clean with appropriate fibre cleaning tools if contamination is present. Use the 0.5 m length in compact installations to minimize excess slack and to maintain tidy, high-density cabling. Store and handle the cable following standard fibre optic safety and handling practices to preserve performance.