Cable de parcheo dúplex BlueOptics LC-UPC a LC-UPC multimodo OM4, 1 m, 50/125 µm, beige

BlueOptics LC-UPC to LC-UPC Multimode OM4 Duplex Patch Cable, 1 m, 50/125 µm, beige is a factory-terminated multimode fiber patch lead designed for short-range high-bandwidth connections. The cable uses OM4 graded 50/125 µm multimode fiber and LC connectors with UPC polish on both ends. Ceramic ferrules and branded fiber ensure consistent optical alignment and low loss. The cable is supplied with a test report verifying insertion loss performance, making it suitable for structured cabling in data centers and server rooms.

Advantages

The duplex OM4 construction offers higher modal bandwidth than standard multimode fibers, enabling reliable transmission for 10 GbE and 40 GbE short-reach links. LC-UPC connectors provide compact terminations that are commonly used in modern networking equipment. Measured insertion loss below 0.2 dB and ceramic ferrules contribute to low attenuation and stable connections. The 1 m length and beige jacket are convenient for tidy patching in racks and fiber panels.

Suitable for

Key specifications

How to use

Route the duplex cable between the two LC ports ensuring the connectors are clean before insertion. Align the keyed LC connectors with the adapter or transceiver port and push until they click into place. For duplex links, maintain correct polarity by matching Tx/Rx orientation as required by the equipment. Disconnect by depressing the latch and pulling the connector straight out to avoid damage to the ferrule.

Recommendations

Inspect and clean LC-UPC endfaces with appropriate fiber cleaning tools before each connection to minimize insertion loss and back reflection. Avoid tight bends and secure the cable to prevent strain; maintain bend radius recommended for multimode fiber. Use the provided test report to verify link performance after installation and re-test if moves or changes are made.