Cable de parcheo Ethernet LANBERG PCF6-20CC-0100-W Cat6 U/UTP 1 m, conductor CCA, 250 MHz, blanco

LANBERG Cat6 Ethernet patch cable PCF6-20CC-0100-W is a 1 m U/UTP cable with a copper-clad aluminium (CCA) conductor and a PVC outer jacket. The cable is rated to 250 MHz and supports data transfer rates up to 10 000 Mbit/s; it is terminated with RJ-45 male connectors on both ends and has 26 AWG conductors with an outer diameter of 5.4 mm. The cable is white and intended for short network links, patch panels and device connections in home or office networks.

Advantages

The LANBERG Cat6 cable provides Cat6 performance in a compact 1 m patch cable with unshielded U/UTP construction, a PVC jacket for basic mechanical protection, and RJ-45 connectors for universal compatibility with Ethernet equipment. Using a copper-clad aluminium conductor reduces weight while maintaining electrical connectivity suitable for short runs. The 250 MHz rating and support for up to 10 000 Mbit/s enable use with typical gigabit and multi-gigabit network equipment within its length limitations.

Suitable for

Key specifications

How to use

Plug each RJ-45 male connector into the corresponding Ethernet ports on your network devices or patch panel. Ensure connectors are fully inserted and the clip engages to secure the connection. Route the cable without sharp bends or crushing forces; avoid running parallel and close to high-power electrical cables to reduce potential interference. For best performance, use this 1 m cable for short links within racks, between adjacent devices, or where minimal cable length is desired.

Recommendations

Use this Cat6 U/UTP patch cable for short, indoor Ethernet connections. For longer runs or environments with significant electromagnetic interference, consider shielded cables or solid copper conductors to maintain performance over distance.