Cable de red DeLOCK M12 D-codificado 4 pines macho a RJ45 macho Cat5e 2 m negro

The DeLOCK M12 Cable D-coded is an industrial Cat5e network cable with a 4‑pin D‑coded M12 male connector on one end and an RJ45 male connector on the other. With a length of 2 m and S/FTP (S‑STP) shielding, the cable is intended for reliable high‑speed data transmission in industrial environments such as machine control and automation.

Advantages

The cable combines an M12 D‑coded 4‑pin interface with a standard RJ45 plug to link industrial devices to Ethernet networks. Shielding in S/FTP (S‑STP) construction reduces electromagnetic interference and helps maintain signal integrity. A 2 m length provides flexibility during installation while the Cat5e specification supports typical industrial Ethernet speeds.

Suitable for

• Connecting PLCs, sensors or actuators to network switches and controllers
• Machine control and automation systems
• Field devices with M12 D‑coded 4‑pin connectors to standard Ethernet equipment

Key specifications

• Product: Network Cable DeLOCK M12 D‑coded 4 pin male to RJ45 male
• Category: Cat5e
• Connector 1: M12 D‑coded 4‑pin (male)
• Connector 2: RJ45 (male)
• Cable length: 2 m
• Shielding: S/FTP (S‑STP)
• Colour: Black
• Brand: DELOCK
• MPN: 80851
• EAN: 4043619808519

How to use

Plug the M12 D‑coded 4‑pin male connector into the matching M12 female port on the industrial device, taking care to align the keying correctly. Insert the RJ45 male plug into the network switch, router or Ethernet port on the controller. Ensure both connectors are fully seated and, if available, secure any locking nuts or strain relief to prevent accidental disconnection. Route the cable to avoid sharp bends and mechanical stress.

Recommendations

Use this Cat5e M12–RJ45 cable in industrial environments where a robust connection between field devices and Ethernet equipment is required; avoid exposure to chemicals or temperatures outside the device specifications and follow local installation standards for network cabling.