Cable de red DeLOCK RJ45 Cat.6A S/FTP 3 m negro

This DeLOCK network cable with RJ45 connectors is a Cat.6A S/FTP cable with a 3 m length and a black PUR jacket designed for outdoor and industrial environments. It provides shielded pairs and an overall braid (S/FTP) to reduce electromagnetic interference and support high-speed data transmission between devices such as NICs, switches and patch panels. The PUR jacket increases resistance to UV light, cold, moisture and dirt while maintaining flexibility and tensile strength.

Advantages

The S/FTP shielding offers improved protection against crosstalk and external interference. The PUR (polyurethane reactive) outer jacket is durable and weather-resistant, suitable for outdoor routing. RJ45 connectors on both ends ensure compatibility with standard Ethernet ports. The 3 m length provides convenient reach for many installation scenarios without excess cable slack.

Suitable for

• Connecting network interface cards (NIC) to switches
• Linking switches to patch panels
• Outdoor Ethernet runs where abrasion and weather resistance are required
• High-speed 10/1 Gbit/s network segments requiring Cat.6A performance

Key specifications

• Brand: DELOCK
• Model / MPN: 80136
• EAN: 4043619801367
• Cable category: Cat.6A
• Shielding: S/FTP (overall braid + individually shielded pairs)
• Length: 3 m
• Connectors: RJ-45 – RJ-45
• Colour: Black
• Jacket material: PUR (polyurethane reactive)

How to use

Plug one RJ45 connector into the Ethernet port of your network device (for example a NIC, switch or router) and plug the other RJ45 connector into the corresponding port on the remote device or patch panel. Route the cable along a suitable path outdoors or indoors, avoiding sharp edges and sources of mechanical damage. Ensure connectors are fully inserted until the locking tab clicks to establish a secure connection.

Recommendations

For outdoor installations, secure the cable with UV-resistant clips or cable ties and avoid tight bends with a radius smaller than recommended for Cat.6A cables. Do not expose the connectors to standing water; use additional protective boots or weatherproof junctions where connectors are exposed to the elements.