Cable de red InLine S/FTP PiMF Cat.6 250MHz PVC cobre transparente 0,5m

The InLine Patch Cable S/FTP PiMF Cat.6 250MHz PVC copper transparent 0.5m is a 0.5 metre Cat.6 patch lead designed for connecting network devices with RJ45 ports, such as switches, routers, wall sockets, patch panels and network cards. It supports Gigabit Ethernet (1 Gbps) and is rated for operation up to 250 MHz. The cable features S/FTP (shielded foil around each pair plus overall braid) and pair-in-metal-foil (PiMF) construction to reduce electromagnetic interference. The transparent PVC jacket provides mechanical protection while showing the internal copper conductors and pair structure.

Advantages

The S/FTP PiMF design offers enhanced protection against near-end and far-end crosstalk and external electromagnetic interference, improving signal integrity for Gigabit connections. The Cat.6 specification and 250 MHz rating ensure compatibility with 1 Gbps networks. RJ45 connectors on both ends provide straightforward plug-and-play connectivity. The transparent PVC sheath delivers basic abrasion resistance and allows visual inspection of the internal wiring.

Suitable for

• Connecting switches, routers and network cards in office or home LANs
• Patching between wall sockets, patch panels and network devices
• Short-length Gigabit Ethernet links (up to typical copper distance limits)

Key specifications

• Type: Patch Cable S/FTP PiMF Cat.6
• Length: 0.5 m
• Conductor: Copper
• Shielding: S/FTP (individual pair foil + overall braid)
• Jacket: Transparent PVC
• Connector: RJ45 – both ends
• Frequency rating: 250 MHz
• Data rate: up to 1 Gbps (Gigabit Ethernet)
• Brand: InLine
• MPN: 76450T
• EAN: 4043718100552

How to use

Plug one RJ45 connector into the network device (switch, router, network card or wall socket) and the other connector into the corresponding port of the connected device. Ensure connectors are fully seated until the latch clicks to secure the connection. Use the cable for short patching runs inside racks, between nearby devices or where a 0.5 m length is required. Avoid sharp bends and kinks to maintain signal quality.

Recommendations

For best results, route the cable away from strong sources of electromagnetic interference (large electric motors, fluorescent ballasts or unshielded power cables). Do not exceed the intended mechanical bending radius and avoid repeated flexing. Verify compatibility with your network hardware and replace the cable if connectors or jacket show damage.