Cable de señal DeLOCK 2 m negro USB-A RJ-50 conector macho/conector macho 67016

The DeLOCK signal cable 2 m (model 67016) is a 2-metre communication cable with a USB 2.0 Type-A male connector on one end and an RJ-50 male connector on the other. With a 3.5 mm diameter and black PVC jacket, it provides a straightforward wired link for devices that require a USB-A to RJ-50 connection, for example connecting an uninterruptible power supply (UPS) to a computer USB port for signalling and data exchange. The cable is CE compliant and packaged in a polybag.

Advantages

This 2 m DeLOCK cable offers ready-made USB-A to RJ-50 connectivity without the need for adapters. Its standard USB 2.0 Type-A interface ensures compatibility with common USB host ports, while the RJ-50 connector provides the required pin layout for compatible UPS and signalling devices. The cable’s compact 3.5 mm diameter and black finish make it unobtrusive in typical office and server environments.

Suitable for

• Connecting UPS units with RJ-50 signalling ports to computer USB-A ports
• Data and signalling links between devices using USB-A and RJ-50 interfaces
• Server racks and desktop setups where a 2 m cable length is appropriate

Key specifications

• Model: DeLOCK 67016
• Connectors: USB 2.0 Type-A male to RJ-50 male
• Cable length: 2 m
• Cable diameter: 3.5 mm
• Colour: Black
• Compliance: CE
• Packaging: Polybag
• Brand: DELOCK
• EAN: 4043619670161

How to use

Plug the USB Type-A male connector into an available USB port on your computer. Connect the RJ-50 male connector to the corresponding RJ-50 port on the UPS or other compatible device. Ensure both devices are powered according to their manufacturer instructions before establishing communication. After connection, operating systems or UPS management software should detect the signalling link; install any required drivers or software supplied by the device manufacturer if detection does not occur automatically.

Recommendations

Use the cable in indoor, dry environments and avoid sharp bends or crushing to preserve signal integrity. For optimal performance, keep cable length and nearby sources of electromagnetic interference to a minimum. Verify device compatibility with RJ-50 pinout and USB 2.0 signalling prior to use.