Cable de vídeo DVI ShiverPeaks 77443-MHQ 24+1 ST/ST 3,0 m

DVI video cable ShiverPeaks 77443-MHQ with a 24+1 pin configuration and ST/ST connectors, length 3.0 m. Designed for digital video signal transmission between devices with DVI interfaces, this cable provides a fixed-length connection for reliable image transfer and simple plug-and-play installation. It is suitable for connecting monitors, projectors and graphics cards that use DVI-D single-link signals.

Advantages

The ShiverPeaks 77443-MHQ offers a 24+1 DVI-D single-link connection that preserves digital image quality over a 3.0 m run. Gold-plated contacts and a molded connector design reduce signal loss and improve connector durability. The cable provides a straightforward, plug-and-play solution without the need for additional drivers or adapters when used with compatible DVI ports.

Suitable for

• Connecting DVI-D compatible monitors to desktop graphics cards
• Linking projectors with DVI input for presentations
• Temporary or fixed workstation setups requiring a 3.0 m DVI-D cable

Key specifications

• Brand: ShiverPeaks
• Model / MPN: 77443-MHQ
• Connector: DVI-D 24+1 (ST/ST)
• Length: 3.0 m
• EAN: 4017538023186
• Type: Single-link DVI (digital only)

How to use

Connect one DVI-D 24+1 connector to the DVI output on your graphics card and the other connector to the DVI input on your monitor or projector. Ensure both devices are powered off or set to the correct input before connecting. After connecting, power on the devices; most systems will detect the display automatically and configure the optimal resolution.

Recommendations

For best results, route the cable away from strong electromagnetic interference sources (large power supplies, unshielded power cables). Avoid sharp bends or kinks and ensure connectors are fully seated. This cable supports single-link DVI resolutions—verify device compatibility if you require dual-link performance.