Cable DisplayPort hembra a hembra montaje en panel DeLOCK 87100

This cable by Delock is a DisplayPort female-to-female, panel-mount extension designed to extend a DisplayPort connection and place a connector at an accessible position. The female port can be fastened with two screws to a slot bracket, cable duct or enclosure with a matching opening, enabling tidy installations and easier access to the DisplayPort port.

Advantages

The DeLOCK DisplayPort 1.2 cable supports 4K at 60 Hz and provides a durable yet flexible 7 mm diameter jacket. Its panel-mount female connector allows secure mounting and a clean cable routing while maintaining compatibility with standard DisplayPort interfaces. The 1 m length offers sufficient reach for most desk or rack setups.

Suitable for

• Extending DisplayPort connections between devices
• Installing a DisplayPort connector on a slot bracket or enclosure
• Neat cable routing in desks, cabinets or AV racks
• Connections where an accessible DisplayPort port is required

Key specifications

• Brand: DELOCK
• Model / MPN: 87100
• EAN: 4043619871001
• Connector: DisplayPort female to DisplayPort female (panel-mount)
• Standard: DisplayPort 1.2 (supports 4K @ 60 Hz)
• Cable length: 1 m
• Colour: Black
• Cable diameter: 7 mm

How to use

Mount the female panel connector by aligning it with the enclosure opening or slot bracket and secure it with the two fastening screws. Connect a DisplayPort male cable from the source device to one female end and connect a DisplayPort male cable to the other female end leading to the display. Ensure connectors are fully seated and that cable routing does not impose sharp bends or strain on the connector.

Recommendations

For optimal results, use short, good-quality DisplayPort male cables on both sides and avoid routing the cable near strong electromagnetic sources. Check that connected devices support DisplayPort 1.2 to achieve 4K at 60 Hz. Tighten mounting screws evenly to avoid deformation of the panel or connector.