Cable Ethernet ProXtend CAT6 RJ-45 15 m azul

The ProXtend CAT6 F/UTP CU LSZH Ethernet Cable (15 m) with RJ-45 connectors on both ends is designed for reliable gigabit network connections. Constructed from 99.9% pure copper AWG 26 conductors and a foil screen, the cable offers reduced electromagnetic interference and consistent performance. The outer LSZH jacket limits smoke and toxic emissions in case of fire. Gold-plated 50μ"U contacts improve durability and transmission quality. The cable supports PoE+ and is suitable for standard 10/100/1000Base-T(X) installations.

Advantages

The cable combines AWG 26 pure copper strands and F/UTP foil shielding to provide stable gigabit throughput and protection against EMI. The LSZH jacket reduces harmful smoke and gases in emergency situations. Reinforced strain relief and a snagless design protect the RJ-45 latch during installation. 50μ"U gold-plated contacts increase connector longevity and can deliver higher throughput compared with standard plating.

Suitable for

• Wired gigabit Ethernet connections (10/100/1000Base-T(X))
• PoE+ enabled devices such as IP cameras, VoIP phones, and access points
• Structured cabling in offices, server rooms, and home networks
• Environments where reduced smoke and halogen-free materials are required

Key specifications

• Length: 15 m
• Connectors: RJ-45 — both ends
• Conductor: 99.9% pure copper, AWG 26
• Shielding: F/UTP (foil screened)
• Jacket: LSZH (Low Smoke Zero Halogen)
• Data standard: 10/100/1000Base-T(X), supports 1000 Mbit/s
• PoE support: PoE+
• Color: Blue

How to use

Connect an RJ-45 plug at each end to the corresponding network ports on devices such as switches, routers, computers, or PoE injectors. Ensure connectors fully seat until the latch clicks to secure the connection. Route the cable to avoid sharp bends, pinching, or exposure to heat sources. For permanent installations, follow local cabling standards and maintain proper bend radius and separation from power cabling.

Recommendations

For optimal performance, avoid excessive bending and tension; keep cable runs within recommended length limits for gigabit Ethernet and separate from high-voltage power lines to minimize interference.