Cable Ethernet ProXtend CAT6 RJ-45 15 m rojo

The ProXtend CAT6 F/UTP CU LSZH Ethernet Cable (15 m) delivers reliable wired network connectivity for home and office installations. Constructed with 99.9% pure copper strands (AWG 26) and foil shielding (F/UTP), this red cable reduces electromagnetic interference and supports Gigabit Ethernet speeds up to 1000 Mbit/s. The LSZH outer jacket limits smoke and toxic fumes in case of fire, while reinforced strain relief and a snagless latch protect the RJ-45 connectors plated with 50µ"U gold for improved durability and transmission quality. The cable supports PoE+ and is compatible with 10/100/1000Base-T(X) networks.

Advantages

The cable combines high-purity copper conductors and foil shielding to minimize signal loss and EMI, ensuring stable Gigabit performance. The LSZH jacket enhances safety in enclosed spaces by reducing harmful emissions during combustion. Reinforced strain relief and a snagless design protect connectors during installation, and the 50µ"U gold-plated RJ-45 plugs offer increased wear resistance and consistent contact quality. PoE+ support enables powering compatible devices over the same cable.

Suitable for

• Wired Gigabit Ethernet connections (10/100/1000Base-T)
• PoE+ devices such as IP cameras, VoIP phones, and access points
• Office and home network cabling where reduced smoke/toxic emissions are required
• Environments with potential electromagnetic interference where foil shielding is beneficial

Key specifications

• Length: 15 m
• Cable type: CAT6 F/UTP CU LSZH
• Conductor: 99.9% pure copper, AWG 26
• Shielding: Foil screen (F/UTP)
• Connectors: RJ-45 to RJ-45, 50µ"U gold plated
• Data rate: up to 1000 Mbit/s (Gigabit Ethernet)
• Standards: 10/100/1000Base-T(X)
• PoE support: PoE+
• Colour: Red

How to use

Connect one RJ-45 plug to your network switch, router, or wall socket and the other to the target device (PC, NAS, IP camera, access point, or VoIP phone). Ensure connectors are fully inserted until the latch clicks. Route the cable without sharp bends and avoid running alongside high-voltage power lines to reduce interference. For installations through conduits or cable trays, verify the 15 m length meets your run requirements before pulling.

Recommendations

For optimal performance, avoid kinking the cable and maintain bend radii greater than four times the cable diameter. Use the LSZH variant in enclosed or public spaces where low smoke and low halogen emissions are preferred. When powering PoE+ devices, confirm switch or injector compatibility with PoE+ specifications.