Cable Ethernet ProXtend CAT6 RJ-45 U/UTP 10M rojo

The ProXtend CAT6 U/UTP CU LSZH Ethernet Cable (10 m) is a high-performance network cable designed for reliable data transfer at speeds up to 1000 Mbit/s. Constructed with 99.9% pure copper 24 AWG conductors and a U/UTP structure, the cable reduces interference while maintaining consistent throughput. The outer jacket is LSZH (Low Smoke Zero Halogen) for reduced smoke and toxic emissions in case of fire. The cable comes in red and includes RJ-45 connectors on both ends.

Advantages

This ProXtend CAT6 cable uses 24 AWG pure copper strands for stable signal transmission and supports PoE+. The connector contacts are plated with 50µ"U gold for improved durability and lower signal loss compared with standard metal connectors. Strain relief and a snagless latch protector increase connector longevity and simplify secure installation. The LSZH jacket minimizes smoke and toxic gases in emergency situations.

Suitable for

• Wired gigabit Ethernet connections (10/100/1000Base-T)
• Home and office network installations
• Power over Ethernet devices compatible with PoE+
• Environments requiring LSZH cable jacket

Key specifications

• Length: 10 m
• Cabling technology: 10/100/1000Base-T(X)
• Conductors: 99.9% pure copper, 24 AWG
• Shielding: U/UTP (unshielded pair, overall unshielded)
• Jacket material: LSZH (Low Smoke Zero Halogen)
• Connector type: RJ-45 to RJ-45
• Connector plating: 50µ"U gold
• Color: Red
• Supports: PoE+

How to use

Connect one RJ-45 connector to your network device (router, switch, computer) and the other RJ-45 connector to the corresponding port. Ensure connectors are fully inserted until the latch clicks to secure the connection. Route the cable to avoid sharp bends and excessive tension; use the built-in strain relief and latch protector when plugging and unplugging to prolong connector life. For best performance, keep cable runs within recommended Ethernet distance limits.

Recommendations

For stable gigabit performance, avoid tight coils and electromagnetic interference sources (large motors, fluorescent lighting). Use the cable in indoor installations where LSZH properties are required and pair with compatible PoE+ equipment when powering devices over Ethernet.