Cable Ethernet ProXtend CAT6A U/UTP RJ-45 0,75m azul

The ProXtend CAT6A U/UTP RJ-45 0.75m Blue is a short, high-performance ethernet cable designed for reliable 10GBase-T network connections. Constructed with 99.9% pure copper conductors (AWG 24) and U/UTP cabling, this blue 0.75 m cable delivers data transfer rates up to 10000 Mbit/s and supports PoE+ for powered devices.

Advantages

The cable features an LSZH (Low Smoke Zero Halogen) outer jacket to reduce smoke and toxic fumes in the event of a fire, strain relief for improved durability, and a snagless latch design for secure connector installation. RJ-45 connectors are plated with 50 µin gold to increase contact reliability and transmission quality; this thicker gold plating offers greater durability and higher throughput compared with standard connectors.

Suitable for

• Short-distance 10GBase-T connections between network equipment (switches, routers, NAS)
• Workstations and desktop PC connections in offices and home networks
• PoE+ devices such as IP phones, wireless access points and network cameras

Key specifications

• Standard: CAT6A, 10GBase-T
• Length: 0.75 m
• Conductor: 99.9% pure copper, AWG 24
• Shielding: U/UTP (unshielded twisted pair)
• Connectors: RJ-45 – RJ-45, 50 µin gold plated contacts
• Data rate: up to 10000 Mbit/s
• PoE: supports PoE+
• Outer jacket: LSZH (Low Smoke Zero Halogen)
• Colour: Blue
• Weight: 0.047 kg

How to use

Connect one RJ-45 connector to your network device (switch, router or network card) and the other to the corresponding port on the second device. Ensure connectors click into place with the snagless latch and avoid sharp bends near the connector or excessive pulling to preserve the strain relief and cable performance. For best 10G performance, keep cable length within recommended limits for CAT6A installations and avoid running alongside high-voltage power lines to reduce interference.

Recommendations

Use this ProXtend CAT6A 0.75 m cable for short patch runs in racks, between nearby devices on a desktop or when a low-visibility, low-smoke LSZH jacket is required. Inspect connectors before installation and replace if plating or contacts are damaged.