Cable HDMI A a USB Type-C ShiverPeaks 10-61185, 8K@60Hz, 1,8 m

ShiverPeaks 10-61185 is an HDMI-A to USB Type-C video cable that supports up to 8K resolution at 60 Hz and measures 1.8 m in length. It is intended for connecting HDMI sources, such as media players or graphics cards, to USB-C displays or adapters that accept DisplayPort Alt Mode, enabling high-resolution single-cable video transmission without the need for additional power or converters when the target device supports the required protocol.

Advantages

The cable provides bandwidth sufficient for 8K@60Hz video, offering compatibility with modern high-resolution displays and content. Its USB Type-C connector is designed for direct connection to displays and adapters that implement DisplayPort Alt Mode, reducing cable clutter by providing a one-cable video link. The 1.8 m length balances reach and signal integrity for desktop and home-office setups, while the cable’s construction is intended to meet the electrical and shielding requirements necessary for stable high-bandwidth video transmission.

Suitable for

• Connecting HDMI sources (PCs, media players, game consoles) to USB-C monitors or adapters that support DisplayPort Alt Mode
• High-resolution video playback and streaming up to 8K at 60 Hz
• Content creation workflows requiring single-cable video output to USB-C displays
• Desktop setups and home-office environments where a 1.8 m cable length is appropriate

Key specifications

• Video resolution support: up to 8K (7680 × 4320) at 60 Hz
• Connector A: HDMI-A (standard HDMI plug)
• Connector B: USB Type-C (supports DisplayPort Alt Mode on host/display)
• Cable length: 1.8 metres
• Intended use: unidirectional video transmission from HDMI source to USB-C display/adapter
• Shielding and conductor design: specified to support high-bandwidth digital video signals

How to use

Connect the HDMI-A end to the HDMI output of your source device and the USB Type-C end to the USB-C input of a monitor or adapter that supports DisplayPort Alt Mode. Ensure the display or adapter accepts video over USB-C and that the source device provides a compatible HDMI output. After connecting, configure the display settings on the source device (resolution and refresh rate) as necessary to match the capabilities of the monitor. If no video appears, verify that the target USB-C port supports DisplayPort Alt Mode and that any necessary firmware or driver updates are installed on the source device.

Recommendations

For best results, use the cable with devices that explicitly list DisplayPort Alt Mode or USB-C video input support. Keep cable runs as direct as possible and avoid sharp bends or excessive tension. When targeting maximum resolution and refresh rate, confirm both source and display settings are set to 8K@60Hz and that the connected hardware supports the required bandwidth.