Cable HDMI óptico Vivolink 8K 30 metros

The Vivolink OPTIC 8K HDMI Cable (30 m) is an optical fiber HDMI 2.1 cable designed for professional AV installations that require reliable, lossless transmission over long distances. With support for resolutions up to 7680 x 4320 @ 60Hz and HDMI Type A male connectors on both ends, the cable transmits high-quality video and audio while remaining resistant to electromagnetic and radio-frequency interference. Kevlar reinforcement and secure connector lock rings provide added mechanical strength for installations in walls, ceilings and cable runways.

Advantages

The optical fiber construction delivers lossless audio and video over long runs and reduces susceptibility to EMI and RFI. HDMI 2.1 compliance ensures compatibility with high-resolution sources and displays, including HDR and 3D content. Kevlar fibers integrated into the cable and fixed with lock rings at the connectors increase tensile strength and protect against damage when the cable is pulled or routed through confined spaces. The cable also supports ARC, HDMI Ethernet Channel and HDCP 2.2 for protected content.

Suitable for

• Professional AV installations in venues, control rooms and conference centers
• Long-distance connections between source and display (up to 30 m)
• Installations where EMI/RFI interference is present or likely
• Wall, ceiling and cable-tray routing where higher pull strength is required

Key specifications

• Length: 30 m
• Standard: HDMI 2.1
• Maximum resolution: 7680 x 4320 @ 60Hz
• Connectors: HDMI Type A male – HDMI Type A male
• Content protection: HDCP 2.2 compliant
• Features: Supports ARC, HDMI Ethernet Channel and 3D
• Tensile strength (pull resistance): 20 kg
• Brand: VivoLink
• MPN: PROHDMIOP8K30
• EAN: 5704174541776

How to use

Connect one HDMI Type A male end of the Vivolink OPTIC 8K cable to the HDMI output of the source device and the other end to the HDMI input of the display or receiver. Ensure connectors are fully seated and, where applicable, secure any strain-relief or locking mechanism in the installation. Use cable routing that avoids sharp bends and protect the cable when pulling through walls or ceilings. The optical cable carries both video and audio signals; enable ARC on compatible devices if you require audio return functionality.

Recommendations

For best performance, avoid tight bending radii and protect connector ends from moisture and dust during installation. Do not exceed the specified tensile strength of 20 kg when pulling the cable; use appropriate fish tapes or pull cords and secure lock rings at connector ends to relieve strain.