Cable HDMI ShiverPeaks BS30-02485 30 m

The ShiverPeaks BS30-02485 30 m HDMI Type A cable provides a long-reach connection for high-quality audio and video transmission between HDMI-equipped devices. Designed with male Type A connectors on both ends and gold-plated contacts, the cable aims to maintain signal integrity over its full 30-meter length. Its black jacket offers a neutral appearance suitable for both consumer and professional AV setups.

Advantages

This 30 m HDMI cable offers an extended cable run without the need for intermediate adapters, supporting simple point-to-point connections between source and display equipment. Gold-plated connector contacts reduce the risk of corrosion and ensure consistent contact quality. The single-ended Type A configuration is widely compatible with TVs, monitors, projectors, AV receivers and many media players, while the black outer jacket provides a low-profile visual that integrates with existing AV installations.

Suitable for

• Connecting a Blu-ray or media player to a distant TV or projector
• Long-run HDMI connections in home theater setups
• Wiring gaming consoles to wall-mounted displays
• AV routing in small professional presentation or meeting rooms

Key specifications

• Cable type: HDMI Type A to HDMI Type A
• Length: 30 m
• Connector plating: gold-plated contacts
• Colour: black outer jacket

How to use

Connect one male Type A connector to the HDMI output of the source device and the other male Type A connector to the HDMI input of the display or AV receiver. Ensure both devices are powered off when inserting the connectors to prevent potential hot-plug issues, then power devices on and select the appropriate HDMI input on the display. Route the cable to avoid sharp bends and secure it along walls or under flooring as needed to reduce strain on the connectors.

Recommendations

For best signal performance over a 30 m run, keep cable routing away from sources of strong electromagnetic interference such as power transformers or unshielded mains cabling. If using high-bandwidth signals (e.g., 4K at high refresh rates), verify device compatibility and input selection to ensure expected resolution and refresh rate are achieved.