Cable INTER-TECH SFF-8643 a 4x SATA/SAS 0,7 m 12 Gbit/s azul

INTER-TECH SFF-8643 to 4x SATA/SAS cable, 0.7 m, designed to connect a host SFF-8643 port or backplane to four SATA or SAS drives. The cable supports up to 12 Gbit/s data rate and is suitable for compact systems and server backplanes where a short, high-speed storage link is required.

Advantages

The cable provides a single-cable connection from an SFF-8643 port to four SATA/SAS devices, reducing internal cabling complexity. With 12 Gbit/s support and a 0.7 m length, it balances high-speed performance and compact routing. Its lightweight construction and standard connectors ensure compatibility with common server backplanes and controller cards that use SFF-8643 and SATA/SAS interfaces.

Suitable for

• Connecting a motherboard or HBA with an SFF-8643 port to multiple SATA/SAS drives
• Internal cabling of server backplanes and storage enclosures
• Compact workstation or rack systems requiring short, high-speed drive connections

Key specifications

• Connectors: 1× SFF-8643 to 4× SATA/SAS
• Length: 0.7 m
• Data rate: up to 12 Gbit/s
• Colour: blue
• Weight (single pack): 35 g
• Brand: INTER-TECH; MPN: 88885670; EAN: 4260455649483

How to use

Power off the system before installation. Insert the SFF-8643 connector into the host port or backplane receptacle, ensuring correct orientation. Connect the four SATA/SAS connectors to the corresponding drive sockets, taking care to align each plug securely. Route the cable to avoid sharp bends and interference with cooling paths, then power the system and verify drive detection in the host BIOS or operating system.

Recommendations

Use this short 0.7 m cable for internal connections where distance between host/controller and drive bay is limited. Avoid excessive bending near connectors and keep the cable clear of hot components; verify compatibility with your controller and drives for mixed SATA/SAS environments.