Cable pasivo DisplayPort 1.2 a HDMI DeLOCK 85961 4K 30 Hz 7 m

The DeLOCK Passive DisplayPort 1.2 to HDMI Cable (model 85961) connects devices with a DisplayPort output to displays with an HDMI Type A input. It supports up to 4K (3840 x 2160) resolution at 30 Hz and is 7 m long, with a cable diameter of 7.2 mm. The cable is black and intended for connecting sources such as laptops, desktop graphics cards or media players to HDMI monitors or TVs.

Advantages

This passive cable provides a direct wired connection between DisplayPort and HDMI interfaces without requiring an external adapter or power source. It supports 4K at 30 Hz for high-resolution video, offers a long 7 m length for flexible setups, and uses standard HDMI Type A and DisplayPort connectors for wide compatibility. The cable's compact diameter and black jacket simplify installation and routing.

Suitable for

• Connecting a laptop or desktop with DisplayPort to an HDMI monitor or TV
• Extending the distance between source and display where 7 m cable length is required
• Home entertainment setups and office workstations that need 4K@30Hz video

Key specifications

• Model: DeLOCK 85961
• Type: Passive DisplayPort 1.2 to HDMI cable
• Supported resolution: up to 4K (3840 x 2160) at 30 Hz
• Connector 1: HDMI Type A (Standard)
• Connector 2: DisplayPort
• Cable length: 7 m
• Cable diameter: 7.2 mm
• Colour: Black
• Brand: DELOCK
• MPN: 85961
• EAN: 4043619859610

How to use

Connect the DisplayPort end of the cable to the source device (for example a laptop or graphics card) and the HDMI Type A end to the display (monitor or TV). Switch the display to the correct HDMI input and set the output resolution on the source device to the desired setting, up to 4K at 30 Hz. No external power or driver installation is required for typical passive usage.

Recommendations

For best results, use the cable for video signals up to 4K@30Hz. If you need higher refresh rates (for example 60 Hz at 4K) or active signal conversion, consider an active adapter or a cable that explicitly supports the higher bandwidth. Avoid tight bends and excessive pulling to preserve cable integrity over the 7 m length.