Cable PowerCon PSSO 3023503K 3x1,5 mm 1 m — cable de alimentación para equipos de audio/vídeo

PowerCon cable PSSO 3023503K 3x1.5 mm 1 m is a detachable mains power cable designed for safe and reliable connection of audio and video equipment. The cable features three conductors with 1.5 mm² cross-section and a locking PowerCon-style connector interface that ensures a secure mating under mechanical strain. At 1 metre length it balances reach and neat routing for stage, studio or fixed installations where a robust, serviceable power link is required.

Advantages

The cable provides a secure locking connection that reduces accidental disconnection during operation. Three 1.5 mm² conductors deliver adequate current capacity for many professional and semi-professional audio/video devices while remaining flexible for handling and cable management. The detachable PowerCon-style connector simplifies installation and maintenance by allowing quick replacement or swapping without altering fixed wiring, and the compact 1 m length helps keep cable runs tidy and reduces excess slack.

Suitable for

Key specifications

How to use

Connect the locking PowerCon-style connector to the matching inlet on the equipment ensuring the connector engages and locks according to the connector’s mechanical guide. Route the cable to the mains outlet or distribution unit and make the mains connection with the appropriate fixed connector or power distribution panel. Verify that the cable is not twisted or under tension and that it is clear of moving parts and heat sources before applying mains power. When disconnecting, switch off power at the source, unlock the connector and remove the cable by following the connector’s release procedure.

Recommendations

Use the cable within its rated current and ambient temperature limits, avoid sharp bends near the connector, and perform periodic inspections for wear or damage. Replace the cable if any insulation or connector damage is observed. For permanent installations, secure the cable to prevent strain on the connector and follow local electrical safety regulations when routing and connecting mains power.