Cable repetidor activo InLine USB3.2 Gen.1 Type-A conector macho / conector hembra, negro, 5m

The InLine USB3.2 Gen.1 Active Repeater Cable (model 35650) extends a USB connection up to 5 meters while maintaining signal integrity. It has a USB A male connector on one end and a USB A female connector on the other, supports USB 3.2 Gen 1 (also referred to as USB 3.1 Gen 1) for high-speed data transfer, and comes in a black finish designed for reliable, long-distance device connections without significant signal loss.

Advantages

This active repeater cable boosts and regenerates the USB signal to allow longer cable runs than passive cables, supports high-speed USB 3.2 Gen 1 data rates, and provides a standard USB A male to USB A female connection for compatibility with typical host ports and peripherals. The 5 m length and durable black jacket make it suitable for installations where distance and reliability matter.

Suitable for

• Extending connection between computer and external hard drive or SSD
• Connecting printers, scanners or other USB-A peripherals at a distance
• Setting up workstations where the USB host and device are separated
• Temporary or permanent cabling where passive cable length is insufficient

Key specifications

• Connector 1: USB A (male)
• Connector 2: USB A (female)
• USB version: USB 3.2 Gen 1 (3.1 Gen 1)
• Cable length: 5 m
• Product colour: Black
• Brand: InLine
• Manufacturer part number (MPN): 35650
• EAN: 4043718153763

How to use

Connect the USB A male end of the InLine active repeater cable to the USB port of the host device (for example a PC or laptop). Plug the USB A connector of the peripheral device into the female end of the cable. Ensure both devices are powered on and the host recognises the connected device; drivers should install automatically if required. Avoid sharp bends and keep the cable routed to prevent strain on the connectors.

Recommendations

For best performance, use this cable with USB 3.2 Gen 1 compliant devices and avoid chaining multiple active repeaters. If the connected device requires significant power, verify that the host port provides sufficient USB power or use a powered hub where necessary.