Cable SATA DeLOCK 0,7 m 2x SATA III SATA 7 pines negro amarillo

The DeLOCK SATA cable (0.7 m) is a 7-pin SATA III extension cable in black and yellow designed for internal PC connections. It supports the SATA 6 Gb/s standard and is backward compatible with earlier SATA versions, allowing connection of devices with a SATA 7-pin port while maintaining appropriate transfer speeds for each device.

Advantages

The cable supports data transfer rates up to 6 Gb/s as defined by the SATA III standard and provides a flexible 0.7 m length for routing inside computer cases. Its black and yellow colour coding helps with quick identification during installation, and the 7-pin SATA connectors on both ends ensure compatibility with standard SATA drives and controllers.

Suitable for

• Connecting internal SATA hard drives and SSDs to motherboard SATA ports
• Extending or replacing existing SATA connections inside desktop PCs
• Upgrading systems to use SATA III-capable devices while retaining compatibility with older SATA revisions

Key specifications

• Cable type: SATA III
• Cable length: 0.7 m
• Connector 1: SATA 7-pin
• Connector 2: SATA 7-pin
• Data transfer rate: up to 6 Gb/s (SATA III)
• Product colour: Black, Yellow
• Brand: DELOCK, MPN: 83950, EAN: 4043619839506

How to use

Power off the computer and disconnect it from the mains before installation. Plug one 7-pin SATA connector securely into the SATA port of the drive and the other into the motherboard or SATA controller port. Ensure connectors are aligned with the keyed port to avoid damage. After connection, restore power and verify the drive is detected in the system BIOS or operating system.

Recommendations

For reliable performance, use this cable inside desktop PC cases and avoid sharp bends or excessive tension on the cable. Keep the cable away from sources of strong electromagnetic interference and route it to allow adequate airflow within the chassis.