Cable SATA DeLOCK 84999 1 m SATA 7 pines negro azul

This SATA cable by Delock is a 1 m internal data cable with SATA III 7-pin connectors designed for connecting SATA devices such as hard drives, SSDs, controller cards or flash memory modules. It supports data transfer rates up to 6 Gb/s and is backwards compatible with earlier SATA versions, operating at the respective lower speeds when used with older devices. The cable is available in black and blue and features metal clips on the connectors for a secure, audible click when plugged in.

Advantages

The cable supports the SATA III standard with transfer speeds up to 6 Gb/s and offers backwards compatibility with previous SATA generations. With a 1 m length it provides flexible routing inside PC cases, and the metal locking clips on both 7-pin connectors ensure a firm and reliable connection. The two-tone colour option (black and blue) allows a tidy visual match inside the system.

Suitable for

• Connecting 3.5" or 2.5" HDDs and SATA SSDs to motherboard or controller cards
• Internal connection of optical drives or SATA-based flash storage modules
• Upgrading or assembling desktop PCs where a 1 m cable length is required

Key specifications

• Cable type: SATA III
• Cable length: 1 m
• Connector 1: SATA 7-pin
• Connector 2: SATA 7-pin
• Data transfer rate: up to 6 Gb/s
• Product colour: Black, Blue

How to use

Align each 7-pin connector with the corresponding SATA port on the drive and motherboard or controller card, then push the connector in until the metal clip clicks to secure the connection. If connecting to a hard drive, route the cable upward from the drive as required by the connector orientation. When connecting to devices using older SATA versions, the cable will operate at the maximum speed supported by those devices.

Recommendations

For reliable operation, avoid sharp bends and excessive tension on the cable. Ensure both ends are fully seated and the metal clips have engaged. Use the 1 m length to route the cable to minimize interference with fans and other components inside the case.