Cable SATA DeLOCK 85230 0,3 m SATA 7 pines + Molex 4 pines

The DeLOCK 85230 SATA cable is a 0.3 m internal cable that connects devices with a 22-pin SATA interface using a SATA 7-pin data connector and a 4-pin Molex power connector. Designed for SATA III data rates, the cable is suitable for compact PC builds and provides secure connections thanks to metal clips on the SATA receptacles that click into place.

Advantages

This cable supports SATA III transfer speeds and combines a SATA 7-pin data connector with a Molex 4-pin power plug for flexible connection options. Its short 0.3 m length is convenient for routing in tight spaces inside a PC case. Metal clips on the SATA connectors ensure a reliable mechanical fit to the device and motherboard.

Suitable for

• Connecting internal SATA drives (HDD/SSD) to a SATA 7-pin port
• Powering devices that require a Molex 4-pin power input from the PSU
• Small-form-factor or compact PC builds where short cable length is needed

Key specifications

• Cable type: SATA III
• Cable length: 0.3 m
• Connector 1: SATA 7-pin + Molex 4-pin
• Connector 2: SATA 22-pin
• Product colour: Black
• Brand: DELOCK
• MPN: 85230
• EAN: 4043619852307

How to use

Insert the SATA 7-pin connector into the device SATA receptacle until the metal clip clicks to secure the connection. Plug the SATA 22-pin end into the motherboard or SATA host port. Connect the Molex 4-pin plug to a free Molex power connector from the power supply to provide power to the device. Ensure the PC is powered off before connecting or disconnecting the cable.

Recommendations

Use this cable in systems that support SATA III for optimal data transfer rates and route the 0.3 m cable to avoid sharp bends. Verify that the power supply has an available Molex 4-pin connector and that connectors are fully seated before powering the system.