Cable SATA Microconnect SAT15005A1C6 0,5 m SATA 7 polos Amarillo

The MicroConnect SAT15005A1C6 is a 0.5 m SATA III cable with 7-pin SATA connectors on both ends, designed to provide reliable, high-speed connections between motherboards and SATA drives. The cable features a yellow jacket and is compact for internal PC installations. Package dimensions are 158 mm x 119 mm x 19 mm and the product weight is 0.01 kg.

Advantages

The SATA Cable Microconnect SAT15005A1C6 supports SATA III transfer rates and uses standard 7-pin connectors for broad compatibility with SATA drives and motherboards. Its short 0.5 m length reduces cable clutter inside the PC case and the durable jacket improves mechanical protection and longevity. The cable’s compact form factor makes it suitable for tight internal routing.

Suitable for

• Connecting internal 2.5" or 3.5" SATA hard drives and SSDs
• Motherboard-to-drive connections in desktop PCs and small form-factor systems
• Upgrading or replacing existing SATA internal cables

Key specifications

• Cable type: SATA III
• Cable length: 0.5 m
• Connector 1: SATA 7-pin
• Connector 2: SATA 7-pin
• Product colour: Yellow
• Weight: 0.01 kg
• Brand: MicroConnect
• MPN: SAT15005A1C6
• EAN: 5704327975885

How to use

Power off your computer and disconnect it from the mains before installing the cable. Locate the SATA port on the motherboard and the SATA connector on the drive, then align the 7-pin connector with the port and press gently until it clicks. Route the 0.5 m cable to avoid sharp bends and secure it with cable ties if needed. After installation, reconnect power and power on the system to verify the drive is detected by the BIOS or operating system.

Recommendations

For reliable operation, avoid excessive twisting or sharp bends and keep the cable away from high-heat sources. Use the 0.5 m length for short internal connections to reduce electromagnetic interference and improve airflow within the case.