Cable sensor de temperatura Lamptron Temperatursensor Pro 2-Pin, 900 mm de longitud

Lamptron Temperatursensor Pro is a 2-pin temperature sensor cable with a 900 mm lead designed for monitoring thermal conditions in PC systems and other electronic equipment. The compact 2-pin connector provides a simple wired probe solution that fits compatible fan controllers, monitoring hubs and some motherboard headers. The external cable and probe arrangement is intended for measuring ambient or localized component temperatures where a remote, unobstructed sensor location is preferred.

Advantages

The 900 mm cable length gives flexibility for routing the sensor to an optimal measurement point inside a case or enclosure without obstructing airflow. The small 2-pin connector and slim probe allow discreet placement near heatsinks, VRM areas, drive bays or intake/exhaust vents. The sensor is compatible with controllers and monitoring devices that accept standard 2-pin temperature probes, offering a straightforward wired alternative to integrated or adhesive sensors.

Suitable for

• Monitoring ambient case temperature in desktop PCs
• Measuring temperature near GPU, CPU power delivery components or VRMs
• External temperature sensing for fan controllers and monitoring hubs
• Testing and diagnostics where a removable wired probe is needed

Key specifications

• Connector type: 2-pin temperature sensor connector
• Cable length: 900 mm
• Probe form factor: slim external wired probe (inline cable-mounted)
• Compatibility: designed for fan controllers, monitoring hubs and boards accepting 2-pin probes
• Application: ambient and localized component temperature measurement

How to use

Route the 900 mm cable from the monitoring device to the desired sensing location and plug the 2-pin connector into a compatible temperature input on your fan controller, monitoring hub or motherboard header. Position the probe near the area to be measured, ensuring it is not in direct contact with moving parts or bare electrical contacts. Secure the cable and probe using cable ties or adhesive clips as needed to prevent movement and to maintain a stable measurement point. Verify the monitoring device detects the sensor and confirm temperature readings through the device interface.

Recommendations

Place the probe in a location representative of the area you want to monitor, avoid direct contact with heat sources that would produce skewed readings, and use the full cable length to achieve clear routing away from obstructed airflow paths. Check compatibility with your controller’s 2-pin input and consult the controller manual for sensor detection and calibration options.