Cable serie DeLOCK 67160 beige 0,3 m DB-9

The DeLOCK 67160 is a 0.3 m DB-9 serial Y-cable (beige) that splits a D-Sub 9 female connection into two D-Sub 9 male connectors. All nine signal lines are routed 1:1, enabling direct transmission of standard RS-232 style serial signals. The compact cable is intended for connecting computers, machines, printers and other devices that use DB-9 serial interfaces.

Advantages

This DB-9 splitter provides full 1:1 wiring for all nine pins to preserve signal integrity and compatibility with devices using serial ports. Its short 0.3 m length reduces cable clutter and signal degradation over short links, while the beige jacket and 5 mm approximate diameter suit typical industrial and office installations.

Suitable for

• Connecting a single D-Sub9 female port to two D-Sub9 male devices
• Short-range serial data connections between computers and peripherals
• Use with machines, printers or instruments with DB-9 serial interfaces

Key specifications

• Brand: DELOCK
• MPN: 67160
• EAN: 4043619671601
• Connector: 1 × D-Sub 9 female to 2 × D-Sub 9 male
• Cable length: 0.3 m
• Color: Beige
• Cable diameter: approx. 5 mm

How to use

Connect the single D-Sub 9 female connector of the DeLOCK 67160 to the source device’s DB-9 port, then attach the two D-Sub 9 male connectors to the target devices. Ensure devices and software are configured for the same serial parameters (baud rate, parity, data bits, stop bits) and that only one endpoint transmits at a time if devices are not designed for multi-drop operation.

Recommendations

Use this cable for short, direct serial links. Avoid using it where active signal switching or proper multi-drop bus handling is required. Verify pinout compatibility with connected devices before installation.