Cable USB DeLOCK 85250 USB 2.0 0,1 m negro

This USB cable from DELOCK (model 85250) is a 0.1 m USB 2.0 cable with male USB Type-A connectors and one end with open wires, designed to power modules or devices from an existing USB Type-A port. Its compact length and USB 2.0 compatibility make it suitable for use in constrained spaces and for supplying power to small electronics such as Raspberry Pi components or other modules in industrial and hobbyist setups.

Advantages

The short 0.1 m length reduces cable clutter and voltage drop for nearby devices, while the open-wire end allows direct connection to terminal blocks, custom circuits or power inputs. USB 2.0 compatibility ensures reliable 5 V power delivery from standard USB Type-A ports. The black jacket provides a neutral, unobtrusive appearance for both professional and home environments.

Suitable for

• Powering Raspberry Pi HATs, modules and add-on boards
• Industrial modules and custom electronics requiring 5 V from USB Type-A
• Prototyping and laboratory setups where a short power lead is needed

Key specifications

• Brand: DELOCK
• Model (MPN): 85250
• EAN: 4043619852505
• Connector 1 / Connector: USB Type-A (male)
• USB version: USB 2.0
• Cable length: 0.1 m
• Colour: Black

How to use

Connect the male USB Type-A plug to a powered USB Type-A port. Route the open wires to the device or module power input and make the required electrical connections according to the target device's wiring diagram, ensuring correct polarity (5 V and GND). Secure any exposed wiring and verify the connection before powering the system.

Recommendations

Use this cable only for powering devices that accept 5 V from a USB Type-A source. Ensure the current requirements of the connected device do not exceed the host port's supply capability. Avoid exposing open wires to short circuits and secure connections with insulating tape or heat-shrink tubing.