Cable USB Epson 2218423 3,65 m USB A USB B negro

The Epson 2218423 USB cable is a 3.65 m data cable with USB A and USB B connectors in black. It is intended to connect compatible printers, scanners and other peripherals to computers or hubs for data transfer and communication. The 3.65 m length provides extra reach for flexible placement of devices while maintaining a straightforward, no-frills design suitable for offices, home workspaces and service areas.

Advantages

This USB A to USB B cable delivers a simple, reliable wired connection for data transfer between host devices and peripherals. The 3.65 m length reduces the need to position devices immediately adjacent to each other, and the black finish helps the cable blend into most environments. The standard USB A and USB B terminations ensure compatibility with a wide range of printers, scanners and many device types that use the USB B interface.

Suitable for

• Connecting printers and scanners to computers or USB hubs
• Office and home workstation setups where extended cable reach is required
• Temporary or permanent installations requiring a basic, reliable USB data link

Key specifications

• Connector types: USB A to USB B
• Cable length: 3.65 m
• Colour: Black
• Intended use: Data transfer and device communication between host and peripheral

How to use

Plug the USB A connector into the host computer, laptop or USB hub and connect the USB B connector to the peripheral device such as a printer or scanner. Ensure both devices are powered on and that any required drivers or software are installed on the host system. Route the cable to avoid sharp bends and to minimize interference from power cables or sources of electromagnetic noise.

Recommendations

For stable operation, use this cable for standard USB data connections at typical desktop distances. Avoid excessive bending near the connectors, do not expose the cable to liquids or extreme temperatures, and check connectors for debris before connecting. If longer reach or higher data rates are required, verify device compatibility with the appropriate cable or interface standard.