Cable USB ShiverPeaks BS77022-W USB 2.0 1,8 m

The ShiverPeaks BS77022-W USB 2.0 cable is a 1.8 m connection cable with a USB A plug on one end and a USB B plug on the other. It provides a USB 2.0 data interface with a maximum theoretical transfer rate of 0.48 Gbit/s, gold-plated contact surfaces and magnetic shielding to reduce interference. The cable is finished in white and is intended for reliable wired connections between computers, printers, scanners, audio interfaces and other devices that use USB A-to-B wiring.

Advantages

This USB cable offers stable USB 2.0 data transfer suitable for common peripherals, with gold-plated contacts that support consistent electrical contact and corrosion resistance. Magnetic shielding improves signal integrity by limiting electromagnetic interference from nearby devices. The 1.8 m length provides a practical balance between reach and cable management in desktop or office environments, while the standardized USB A and USB B connectors ensure broad compatibility with many established devices.

Suitable for

• Connecting desktop PCs or laptops to printers and multifunction devices
• Linking scanners and external drives that use USB B
• Connecting audio interfaces, MIDI controllers or other studio equipment with USB B
• Replacing worn or lost USB A–B cables in office or home setups

Key specifications

• Connector types: USB A (male) to USB B (male)
• USB standard: USB 2.0, up to 0.48 Gbit/s
• Cable length: 1.8 m
• Contact plating: gold-plated contacts for improved conductivity
• Shielding: magnetic shielding to reduce electromagnetic interference
• Colour: white

How to use

Plug the USB A connector into a host device such as a computer or laptop and insert the USB B connector into the peripheral device, for example a printer, scanner or audio interface. Ensure both ends are fully seated to establish a reliable connection. The cable supports standard plug-and-play operation under operating systems that provide USB 2.0 driver support; no additional software is required for basic data transfer. For stable performance, avoid sharp bends near the connectors and route the cable away from sources of strong electromagnetic interference where possible.

Recommendations

For best results, use this cable at moderate lengths (up to 1.8 m) between host and peripheral to maintain USB 2.0 data rates. Keep the cable straight and avoid heavy mechanical stress to the connectors. If connecting devices that draw power from the USB bus, verify the host can supply sufficient current; for high-power peripherals, use a dedicated powered hub or the peripheral's external power supply.