Cable USB Tether Tools CUC2515-ORG 4,6 m USB-C Micro-USB B naranja

The Tether Tools CUC2515-ORG is a 4.6 m (15 ft) USB cable that connects devices with a USB-C port to cameras or devices using a Micro-USB B (5-pin) connector. Built to USB 2.0 specifications, the cable supports data transfer rates up to 0.48 Gbit/s and is fully shielded to reduce signal noise and transmission errors. Its bright orange jacket improves visibility in studio and field setups and the reversible USB-C end simplifies connection to modern computers and peripherals.

Advantages

The cable provides a direct USB-C to Micro-USB B connection without adapters, ensuring a secure physical link for tethering and data transfer. Constructed to high USB standards, it offers consistent conductivity and plated shielding to protect against external interference. At 4.6 m length, it gives ample reach for most tethering workflows while remaining compliant with USB 2.0 signaling.

Suitable for

• Photographers tethering USB 3.0 cameras (using Micro-USB B) to computers with USB-C ports
• Data transfer between cameras, portable devices and computers supporting USB 2.0
• Studio and location shoots where a highly visible cable color is preferred
• Setups requiring a reversible USB-C connection for quick plug-in

Key specifications

• Brand: Tether Tools
• Model: CUC2515-ORG
• Connectors: USB-C to Micro-USB B (5-pin)
• USB standard: USB 2.0
• Maximum data rate: 0.48 Gbit/s
• Cable length: 4.6 m (15 ft)
• Colour: Orange
• EAN: 818307014510

How to use

Connect the USB-C end to the computer or host device and the Micro-USB B end to the camera or peripheral. Ensure both devices are powered on and configured for tethered operation or mass storage/data transfer as required by your software. The reversible USB-C connector allows insertion in either orientation. Avoid sharp bends and excessive tension on the cable during use.

Recommendations

For reliable tethering, use this cable with devices that support USB 2.0 data rates and verify camera and software compatibility before critical shoots. Store the cable coiled without tight kinks and keep it away from strong electromagnetic sources to minimize interference.