Cable USB Type-C ShiverPeaks BS20-74025 1 m Mini-DIN 8 pines negro

The ShiverPeaks BS20-74025 is a 1 m USB Type-C cable with an 8-pin Mini-DIN connector, designed to connect devices that require a Mini-DIN interface to a USB Type-C port. With a 3.6 mm cable diameter and black finish, the cable is compact and unobtrusive while providing a stable connection for data transfer and charging where supported by connected devices. The construction focuses on a slim profile suitable for confined spaces and everyday cable routing between modern devices and legacy or specialized equipment.

Advantages

This cable combines the convenience of a USB Type-C plug with an 8-pin Mini-DIN attachment, enabling interoperability between equipment families without adapters. Its 1 m length balances reach and minimal clutter. The 3.6 mm diameter offers a low-profile cable that is easier to route behind desks or through tight cable channels. The black colour reduces visual distraction in consumer and professional setups.

Suitable for

• Connecting audio/video or control equipment that uses an 8-pin Mini-DIN connector to a device with a USB Type-C port
• Short-distance data transfer between compatible devices
• Powering or charging devices from USB Type-C power sources when the connected device supports USB power over the Mini-DIN interface
• Use in desktop, studio, or AV rack installations where a compact cable is required

Key specifications

• Cable length: 1 m
• Connector 1: USB Type-C
• Connector 2: Mini-DIN, 8-pin
• Cable diameter: 3.6 mm
• Colour: Black

How to use

Ensure both devices are powered off or follow manufacturer guidelines for hot-plugging. Insert the USB Type-C plug into the device with the USB-C port and the 8-pin Mini-DIN connector into the corresponding socket on the other device, aligning pins carefully to avoid damage. Once connected, power on devices and verify proper recognition for data transfer or power delivery. Handle the cable by the connector housings when plugging or unplugging to avoid strain on the conductor ends.

Recommendations

Use the cable for short runs up to 1 m and avoid sharp bends or kinks near connector ends. Confirm device compatibility for data and power functions, since not all Mini-DIN devices accept USB power or standard USB data protocols. Store coiled loosely to preserve the 3.6 mm cable structure and inspect connectors periodically for dust or debris.