Caja de PC Kolink Inspire K7 ARGB Midi Tower Negra

The Kolink Inspire K7 ARGB Midi Tower Black is a compact PC case designed for ATX, Micro ATX and Mini-ITX builds. It combines a tempered glass side panel and a mesh front with an angled ARGB strip to balance component visibility and airflow. The case includes a pre-installed 120 mm rear ARGB fan, supports multiple additional 120 mm fans and can accommodate a front radiator up to 280 mm. With bottom-mounted PSU support, room for both 2.5" and 3.5" drives and a clean black interior with a PSU shroud, the Inspire K7 offers a practical layout for mainstream desktop systems.

Advantages

The Inspire K7 provides flexible cooling options with a pre-installed rear 120 mm ARGB fan, space for up to three 120 mm fans at the front and two 120 mm fans on the roof, plus room for a 280 mm front radiator. A full tempered glass side panel allows easy viewing of components while the mesh front and vented inlets promote airflow. The case supports standard ATX power supplies and includes dust filtration under the PSU area. Tool-less drop-and-lock 3.5" drive cages and multiple 2.5" mounting locations simplify storage installation and cable management openings with up to 30 mm of routing space keep the interior tidy.

Suitable for

• Mainstream gaming and multimedia desktops that require ARGB lighting and moderate cooling.
• Home or office builds using ATX, Micro ATX or Mini-ITX motherboards.
• Systems that need multiple 2.5" and 3.5" drives with easy installation.
• Compact builds where a 280 mm front radiator or multiple 120 mm fans are desired.

Key specifications

• Form factor: Midi Tower compatible with ATX, Micro ATX, Mini-ITX
• Dimensions: 190 mm (W) x 400 mm (D) x 440 mm (H)
• Pre-installed cooling: 1 × 120 mm rear ARGB fan
• Additional cooling support: up to 3 × 120 mm front, up to 2 × 120 mm roof; up to 280 mm radiator at front
• Drive bays: 2 × 3.5" bays, 2 × 2.5" bays
• Expansion: graphics card length up to 335 mm (310 mm with front AIO), CPU cooler height up to 160 mm
• Front I/O: 2 × USB 2.0, 1 × USB 3.2 Gen 1 Type-A, audio ports and RGB control button
• Materials: steel, mesh, plastic and tempered glass side panel
• Weight: approx. 5 kg
• Power supply: bottom-mounted (not included); PSU clearance up to 180 mm with removable dust filter
• Colour: Black

How to use

Install your chosen motherboard (ATX, Micro ATX or Mini-ITX) onto the tray and route cables through the provided openings behind the tray and PSU shroud using the up to 30 mm cable management space. Fit the PSU into the bottom compartment on the removable dust-filtered area, then install drives using the drop-and-lock 3.5" cages or the 2.5" mounting points on or above the shroud. Mount cooling hardware as required: install the pre-fitted 120 mm rear ARGB fan, add up to three 120 mm front fans and up to two roof fans or fit a 280 mm radiator in the front if desired. Connect the front-panel USB and audio headers and attach the ARGB control either with the I/O RGB button or to a motherboard 3-pin 5V RGB header for software control.

Recommendations

For balanced airflow, use a combination of front intake fans and the rear exhaust fan, and keep dust filters clean. When installing a front 280 mm radiator, check clearance for GPU length; with such a radiator installed the maximum supported GPU length is reduced. Use motherboard RGB software or the front RGB button to synchronize lighting and ensure ARGB connections follow your motherboard’s 5V 3-pin pinout to avoid damage.