Cámara de seguridad IP Hikvision Pro Series 6 MP Darkfighter mini bala fija, 6 MP, CMOS de 1/2,4", campo de visión 114,8°×60°, 30 fps, con cable, interior/exterior, techo/pared, negra

The IP security camera Hikvision Pro Series 6 MP Darkfighter is a fixed mini bullet camera designed for wired network surveillance in indoor and outdoor environments. It integrates a 6-megapixel 1/2.4" CMOS sensor and delivers up to 30 fps video with a wide field of view (114.8° horizontal × 60° vertical). The camera supports ceiling or wall mounting, features video motion detection, and comes in a black housing. Detection, observation and recognition distances are specified at approximately 64 m, 25 m and 12 m respectively.

Advantages

This Hikvision Pro Series model provides high-resolution imaging with a 6 MP sensor and Darkfighter low-light technology to improve visibility in dim conditions. Wired Ethernet connectivity ensures stable network transmission and compatibility with standard IP surveillance systems. The camera's wide field of view and 360° rotation capability simplify area coverage planning for many installation scenarios. Built-in video motion detection assists in automated event triggering.

Suitable for

• Perimeter monitoring of residential and small commercial sites
• Indoor surveillance of lobbies, corridors and storage areas
• Outdoor monitoring of entrances, driveways and parking areas
• Ceiling or wall installations where wide-angle coverage is required

Key specifications

• Image sensor: 1/2.4" CMOS, 6 MP (3200 × 1800)
• Maximum frame rate: 30 fps
• Field of view: 114.8° (horizontal) × 60° (vertical)
• Connectivity: Wired Ethernet LAN
• Placement: Indoor and outdoor, ceiling or wall mount supported
• Detection / observation / recognition ranges: ~64 m / 25 m / 12 m
• Video analytics: Video motion detection included
• Color: Black; Weight: 0.505 kg

How to use

Mount the camera on a suitable ceiling or wall location that provides the intended field of view and ensures access to a wired Ethernet connection and power. Aim and secure the camera body, then connect the Ethernet cable to your network switch, PoE injector or PoE-enabled NVR as applicable. Configure initial network and video settings through the Hikvision client software or a compatible management platform, enable motion detection if required, and adjust framing and exposure settings to match the installation environment.

Recommendations

For reliable operation, use a stable wired Ethernet connection and, when available, Power over Ethernet to simplify power and data cabling. Choose mounting positions that avoid direct, intense light sources facing the lens to reduce backlight impact. Regularly check firmware updates from the manufacturer and test motion detection zones after installation to minimize false alarms.