Cámara de vigilancia IP Hikvision Pro Series ColorVu 8 MP Smart Hybrid Light bullet fija DS-2CD2T87G3-LIS2UY/SL 2,8 mm, 108,8° H, 30 fps, blanca

Hikvision Pro Series ColorVu 8 MP Smart Hybrid Light fixed bullet DS-2CD2T87G3-LIS2UY/SL 2.8mm is a wired IP security camera designed for reliable indoor and outdoor monitoring. Equipped with a 1/1.8" CMOS 8 MP sensor and a 2.8 mm lens, the camera captures 3840 x 2160 resolution video at 30 fps and provides a wide 108.8° horizontal field of view. The housing supports wall or pole mounting and the device offers ColorVu full-color imaging day and night, hybrid lighting (IR and white light), video motion detection and Ethernet connectivity for stable networked surveillance.

Advantages

The camera combines high-resolution 8 MP imaging with HikAI-ISP noise reduction and scene-adaptive WDR to deliver clear footage in diverse lighting conditions. Smart Hybrid Light integrates IR and white supplemental lighting to maintain color detail at night and supports three lighting modes for flexible illumination control. Built-in audio and alarm interfaces, two-way audio capability and active strobe plus audio alarm options enhance on-site deterrence. The IP67-rated white housing and anti-corrosion design make the unit suitable for outdoor conditions while maintaining long-term reliability.

Suitable for

• Perimeter and property surveillance for residential and commercial sites
• Parking lots and outdoor entrances requiring wide-angle coverage
• Entrances, corridors and open indoor spaces needing fixed, high-resolution monitoring
• Locations where night-time color imaging and deterrent lighting are desired

Key specifications

• Optical sensor: 1/1.8" CMOS, 8 MP (3840 x 2160)
• Lens: 2.8 mm, horizontal FOV 108.8°, vertical FOV 56.4°
• Frame rate: up to 30 fps
• Detection range: up to 89 m; observation up to 35 m; recognition up to 17 m
• Lighting: ColorVu full-color imaging, Smart Hybrid Light (IR + white light), night vision up to 60 m
• Connectivity: Wired Ethernet LAN
• Mounting: Wall or pole mounting supported
• Environmental protection: IP67, anti-corrosion design
• Physical color and weight: white housing, approximately 1.25 kg

How to use

Mount the camera on a stable wall or pole using appropriate fasteners and ensure the unit is positioned to cover the intended scene with the 2.8 mm wide-angle view. Connect the camera to a PoE-capable network switch or an appropriate power source and Ethernet network for video and control. Configure network settings, enable ColorVu and Smart Hybrid Light modes as needed, and integrate the device with compatible NVR or VMS for recording, live view and alerts. Use the built-in audio and alarm interfaces to connect external alarm devices or speakers if required.

Recommendations

For best results, install the camera at a height and angle that balance wide coverage with subject detail—typical mounting heights of 2.5–4 m are common for entrances and perimeters. Enable scene-adaptive WDR in mixed-light environments and select the appropriate supplemental lighting mode to avoid overexposure when the white light activates. Regularly inspect seals and mounting hardware for environmental wear and keep firmware updated to ensure optimal performance and security integration.