Cámara de vigilancia IP Hikvision Pro Series DS-2CD2687G3-LIZS2UY/SL 8 MP ColorVu varifocal motorizada 2,8–12 mm Bullet, 1/1,8 pulgadas CMOS, giro 360°, blanco

Wired IP security camera Hikvision Pro Series DS-2CD2687G3-LIZS2UY/SL is an 8 MP ColorVu bullet camera with a motorized varifocal 2.8–12 mm lens and 1/1.8" CMOS sensor. Designed for indoor and outdoor wall or pole mounting, the camera provides wide-angle to telephoto coverage with horizontal field of view from 41.2° to 112.3° and vertical field from 23.1° to 58.1°. Color imaging is available day and night with integrated lighting and intelligent image processing for clear details and accurate scene rendering.

Advantages

The camera combines HikAI-ISP noise reduction and Scene-adaptive WDR to maintain image clarity in challenging lighting, while ColorVu technology enables full-color 24/7 imaging. Built-in deep-learning algorithms classify persons and vehicles for more relevant event detection. Integrated dual-array microphones and two-way audio support real-time audio monitoring and interaction. The housing features corrosion-resistant design and protection against dust, water and impact (IP67, IK10), plus active strobe light and audio alarm for deterrence.

Suitable for

• Perimeter and parking area surveillance
• Building entrances, lobbies and loading docks
• Outdoor wall or pole-mounted monitoring
• Sites requiring color imaging at night and audio interaction

Key specifications

• Image sensor: 1/1.8" CMOS, 8 MP (3840 × 2160)
• Lens: motorized varifocal 2.8–12 mm
• Field of view: horizontal 41.2°–112.3°, vertical 23.1°–58.1°
• Color imaging: ColorVu technology for 24/7 color
• Lighting: Smart Hybrid Light (IR + white light), night vision up to 60 m
• Analytics: person and vehicle classification (deep learning)
• Audio: built-in arrayed dual-microphone and two-way audio
• Protection: IP67 (water/dust), IK10 (vandal resistant), corrosion-resistant housing
• Mounting: wall or pole; 360° rotation capability
• Weight: 1.55 kg
• Color: white
• Connectivity: wired Ethernet LAN

How to use

Mount the camera on a suitable wall or pole using the included bracket, orient and rotate the housing to achieve the desired coverage, and connect it to the network via Ethernet for power and data. Use the motorized varifocal lens to set the focal length between 2.8 and 12 mm and adjust focus through the camera’s web interface or management software. Configure image settings (WDR, ColorVu lighting modes) and analytics (person/vehicle classification) in the device configuration to match the scene and detection requirements.

Recommendations

For reliable long-term operation, install the camera at a height and angle that minimize direct exposure to strong light sources, ensure the mounting surface is corrosion-resistant for outdoor locations, and select the appropriate lighting mode (IR, white light, or hybrid) depending on the scene to balance illumination and deterrence. Regularly update firmware and verify network security settings.