Cámara instantánea Fujifilm Instax Mini 12 Rosa — imagen 86×54 mm, película 62×46 mm, distancia focal 60 mm

The Fujifilm Instax Mini 12 in Pink is an instant print camera designed for 86 x 54 mm prints using Instax Mini film. It features a 60 mm focal length lens with two optical elements in two groups and an aperture ratio of 1:12.7. The camera uses two AA batteries and has compact dimensions of 104 mm × 66.6 mm × 122 mm with a weight of 0.306 kg. Exposure control is electronic, offering shutter speeds from 1/2 s to 0.004 s and a built-in flash with an effective range of approximately 0.3–2.2 m.

Advantages

The Instax Mini 12 provides instant physical prints at 86 x 54 mm, combines a simple fixed focal length lens with automatic exposure and integrated flash, and runs on readily available AA batteries for easy replacement. Its small size and light weight make it convenient to carry for casual shooting and social events.

Suitable for

• Instant photos for parties and social gatherings
• Everyday snapshots and travel mementos
• On-the-spot gifting and creative craft projects

Key specifications

• Picture size: 86 x 54 mm
• Film size: 62 x 46 mm
• Focal length: 60 mm
• Lens construction: 2 elements in 2 groups
• Aperture ratio: 1:12.7
• Shutter speed range: 1/2 s to 0.004 s
• Built-in flash with range approximately 0.3–2.2 m
• Power: 2 × AA batteries
• Dimensions: 104 mm × 66.6 mm × 122 mm
• Weight: 0.306 kg
• Colour: Pink

How to use

Insert two AA batteries and load Instax Mini film (62 x 46 mm film pack) according to the film pack instructions. Turn on the camera, set framing using the viewfinder, and press the shutter to take a photo; the camera will automatically set exposure and trigger the built-in flash when needed. After exposure, the camera ejects the print; allow it to develop on a flat surface away from direct light until the image fully appears.

Recommendations

For best results, use genuine Instax Mini film and replace batteries when flash brightness or ejection performance decreases. Keep the lens clean and avoid exposing freshly ejected prints to direct sunlight or bending until development is complete.