Campana extractora integrable CANDY CBG625/1X, 520 mm de ancho, 207 m³/h, filtro de carbón, control giratorio, plateado

The CANDY CBG625/1X is a built-in cooker hood with a 520 mm width designed for integrated installation above standard cooking zones. It provides a maximum extraction capacity of 207 m³/h and supports both ducted (external venting) and recirculating (using a charcoal grease filter) operation. The unit is finished in silver, has a compact 130 mm height and 280 mm depth, and is operated using rotary controls. Task lighting is supplied by two 2 W LED bulbs. Energy consumption is rated at 40 kWh/year with a connected load of 74 W and a motor power of 70 W.

Advantages

The hood combines a compact built-in design with a practical extraction rate suitable for small to medium kitchens. Its dual-mode operation allows flexible installation where external ducting is not available, thanks to the charcoal grease filter for recirculation. Rotary controls offer simple, tactile operation while the two integrated LED bulbs provide focused illumination of the cooking surface with low energy use. The silver finish and reduced height enable discreet integration into a variety of kitchen layouts.

Suitable for

• Small to medium domestic kitchens where space above the hob is limited
• Installations without immediate access to external ducting (recirculation mode)
• Kitchens requiring integrated lighting and compact extractor performance
• Built-in cabinet installations that require a low-height hood unit

Key specifications

• Width: 520 mm
• Maximum extraction capacity: 207 m³/h
• Type: Built-in cooker hood
• Grease filter type: Charcoal filter (recirculation)
• Control type: Rotary control
• Lighting: Two 2 W LED bulbs
• Finish: Silver
• Height: 130 mm
• Depth: 280 mm
• Energy consumption: 40 kWh/year
• Connected load: 74 W; Motor power: 70 W

How to use

Install the CANDY CBG625/1X into a compatible cabinet or enclosure above the cooking surface following the manufacturer’s mounting instructions. Choose ducted or recirculating configuration depending on installation possibilities: for recirculation, fit the charcoal grease filter and ensure adequate air circulation; for ducted operation, connect the hood to suitable external ducting. Use the rotary controls to select the required extraction speed and switch the LED lighting on or off as needed. Clean or replace the charcoal filter according to the maintenance schedule and wipe exterior surfaces with a soft, damp cloth.

Recommendations

For effective operation, run the hood at a medium or high setting during heavy cooking and allow it to run for a few minutes after cooking to clear residual odors and humidity. Replace the charcoal filter at intervals recommended by the manufacturer or sooner if odors persist. Regularly clean the exterior and check the LED bulbs and rotary control for proper function to maintain performance and longevity.