Carcasa para HDD Inter-Tech 88884122 negra 2.5"

The Inter-Tech 88884122 is a 2.5" HDD/SSD enclosure with a USB Type-C connection supporting USB 3.1 Gen2 (3.2 Gen 2) for data transfer rates up to 10 Gbit/s. The slim black housing combines aluminium and plastic, accommodates a single 2.5" SATA drive and supports SATA I/II/III interfaces. The enclosure is lightweight and designed for quick tool-assisted installation using the included screwdriver.

Advantages

The aluminium outer shell with rounded corners and brushed finish provides a compact and durable casing while keeping weight low. USB 3.1 Gen2 (10 Gbit/s) via a Type-C port enables fast file transfer and compatibility with modern hosts. Tool-assisted installation allows secure mounting of a 2.5" drive in seconds. The enclosure supports SATA I, II and III, ensuring backward compatibility with a wide range of drives.

Suitable for

• Expanding storage using a 2.5" SSD or HDD
• Quick data backup and transfer between computers
• Accessing files from an internal SATA drive externally
• Portable use with laptops, desktops and compatible devices

Key specifications

• Model: Inter-Tech 88884122 (GD-25010)
• Drive bay: 1 × 2.5" SATA (supports SATA I/II/III)
• Interface: USB Type-C, USB 3.1 Gen2 (up to 10 Gbit/s)
• Supported maximum capacity: up to 16 TB (per product summary)
• Material: Aluminium and plastic; colour: black
• Weight: 0.11 kg

How to use

Open the enclosure, insert a compatible 2.5" SATA drive into the connector and secure it with the supplied screws using the included screwdriver. Close the enclosure and connect it to a host device using the USB Type-C cable. The host should detect the drive automatically; if necessary, initialize or format the drive according to the operating system prompts.

Recommendations

Use a USB 3.1 Gen2 (USB-C) port on the host for maximum transfer performance and ensure the drive is properly cooled during extended high-load operations. Handle the aluminium casing carefully to avoid scratches and use the included screwdriver to ensure screws are tightened without over-torquing.