Carcasa SSD Unitek SolidForce Reefer gris — M.2 NVMe PCIe, USB‑C 10 Gbit/s, aluminio, 1 unidad

The UNITEK SolidForce Reefer is an M.2 SSD enclosure that supports one M.2 drive (PCIe/NVMe and SATA/AHCI) in sizes 2242, 2260 and 2280, and accommodates modules with a heatsink up to 12.5 mm height. The grey aluminium housing with fins and a hollowed internal layout improves heat dissipation while the USB Type-C interface delivers USB 3.2 Gen 2 SuperSpeed transfers up to 10 Gbit/s, backward compatible with earlier USB generations.

Advantages

The enclosure supports both NVMe (M-key) and SATA (B+M-key) M.2 drives and uses UASP and TRIM to improve throughput and drive efficiency. An aluminium heat exchanger and silicone thermal pad are included for thermal conduction, and the built-in auto-sleep mode powers down the device after 30 minutes of inactivity to save energy. Its compact aluminium construction provides durability and passive cooling through fins and a hollowed design.

Suitable for

• Expanding external storage for laptops, desktops and tablets via USB-C
• Transferring large files and backups at SuperSpeed (10 Gbit/s) where supported
• Using existing M.2 NVMe or SATA drives as portable drives

Key specifications

• Supported M.2 sizes: 2242 / 2260 / 2280
• Supported interfaces: PCIe (NVMe) and SATA/AHCI (M-key and B+M-key)
• USB: USB 3.2 Gen 2 (up to 10 Gbit/s), USB Type-C connector
• Material and color: Aluminium, grey
• Supports drives with heatsink up to 12.5 mm height
• Included: aluminium heat exchanger and silicone thermal pad
• Features: UASP, TRIM support, hollowed design for heat dissipation, auto-sleep after 30 minutes
• Number of drives: 1
• Weight: 0.024 kg

How to use

Open the enclosure, insert a compatible M.2 SSD (2242/2260/2280, NVMe or SATA) ensuring correct orientation for the M-key or B+M-key notch, place the silicone thermal pad against the drive if required, then close and secure the housing. Connect the enclosure to a host device using the supplied USB Type-C cable; the drive should be recognised by the operating system. If necessary, format the drive or initialise partitions before first use.

Recommendations

For best thermal performance, use the included aluminium heat exchanger and position the enclosure in a well-ventilated area. Ensure the host system supports USB 3.2 Gen 2 to achieve maximum transfer speeds; otherwise performance will default to the highest supported USB version.