Carcasa sumergible Puluz para cámara Insta360 Ace Pro – Puluz PU964T

Waterproof housing Puluz PU964T for the Insta360 Ace Pro camera provides sealed protection for underwater and wet-condition recording. This enclosure is made from durable polycarbonate with a tempered optical glass lens and preserves camera controls and lens access while preventing water, dust, fingerprints and scratches from affecting the sensor and optics. A cold shoe on the housing allows mounting of lighting or other accessories for improved footage in low-light environments.

Advantages

The Puluz PU964T enables submersion to depths up to 60 meters, expanding shooting possibilities for diving, snorkeling and underwater sports. The tempered glass port ensures high image clarity and the anti-reflective coating reduces glare and light loss for truer colours and sharper details. The housing construction keeps camera buttons and connections accessible so you can operate the Insta360 Ace Pro reliably in wet and harsh conditions. Included adapter and screw make mounting and securing the camera straightforward.

Suitable for

• Diving and snorkeling shoots
• Underwater sports and action footage
• Rainy or wet-weather photography
• Locations with dust, sand or splash risk

Key specifications

• Compatibility: Insta360 Ace Pro camera
• Body material: polycarbonate (PC)
• Lens port: tempered optical glass with anti-reflective coating
• Maximum immersion depth: 60 meters
• Accessory mount: cold shoe included
• Included items: housing, adapter, screw

How to use

Open the housing and place the Insta360 Ace Pro camera inside, ensuring the camera is seated correctly against the seals. Attach the provided adapter and secure the housing using the supplied screw, checking that the lid is fully closed and the O-ring seal is clean and intact. Mount any optional accessories to the cold shoe before submersion. Operate the camera controls through the housing as needed, and avoid opening the enclosure until fully dry and debris-free.

Recommendations

Before each dive, inspect the sealing O-ring and lenses for sand or grit and perform a shallow water test at the surface to confirm watertight integrity. Rinse the housing with fresh water after use in saltwater and allow to dry completely before storage. Do not open the housing while submerged or when wet to prevent moisture entering the camera compartment.