Cepillo de alambre KWB 607330 7,5 cm diámetro de vástago 6 mm

The KWB 607330 wire wheel is a 7.5 cm diameter brush with a 6 mm shank designed for attachment to rotary tools. Made with crimped HSS steel wire, it removes rust, paint, scale and encrustations from metal and stone surfaces and is shaped to reach narrow edges, frames, posts, grilles and pipes.

Advantages

Crimped HSS steel wire provides durable abrasive action while maintaining flexibility for profiling and edge work. The 6 mm shank fits common rotary tool chucks, allowing fast, secure mounting. The compact 7.5 cm diameter permits access to confined areas and detailed surfaces without excessive material removal.

Suitable for

Key specifications

How to use

Fit the 6 mm shank into the rotary tool chuck and secure it according to the tool manufacturer's instructions. Start at low speed to check balance and contact, then increase speed as appropriate for the material. Apply steady, light pressure and move the brush across the workpiece to remove rust, paint or scale; avoid pressing hard to prevent wire breakage and excessive substrate removal. Maintain firm control of the tool and work in short passes for even results.

Recommendations

Use personal protective equipment such as safety glasses, gloves and a dust mask. Do not use the brush on delicate or highly polished surfaces. Inspect the brush before use for loose wires or damage and replace if necessary. Follow the rotary tool's maximum speed rating and KWB's safety guidance.