Cinta adhesiva de transferencia de doble cara 3M 9545NY15, 50 m de longitud, 15 mm de ancho

3M 9545NY15 is a double-sided transfer adhesive tape, 50 m long and 15 mm wide, made of rubber-based adhesive formulated for bonding, splicing and mounting thin materials. The tape delivers a narrow, continuous adhesive strip that is suitable for industrial, workshop and general-purpose fixes where an unobtrusive bond is required. Operational temperature range is -20 °C to 90 °C.

Advantages

The rubber-based adhesive provides reliable initial tack and secure bonding on a variety of substrates. Its 15 mm width and 50 m length allow for extended application runs without frequent reel changes. The thin 0.3 mm profile creates a discreet bond line useful for applications requiring minimal buildup.

Suitable for

Key specifications

How to use

Ensure surfaces are clean, dry and free of grease or dust. Cut the required length from the 50 m roll, remove the liner and apply the adhesive transfer tape to one substrate, pressing firmly to ensure contact. Remove the remaining liner and join the second substrate, applying uniform pressure to activate the adhesive. Allow time for the bond to develop before subjecting to load.

Recommendations

For best results, apply at room temperature on flat, well-prepared surfaces. Test adhesion on representative materials before full-scale use, especially on low-energy plastics or textured substrates. Avoid prolonged exposure at temperatures near the upper limit if continuous high-temperature performance is required.