Cinta de marcado de cables Patchsee ECO-Scratch 10 m, rojo, 19 mm de ancho

Patchsee ECO-Scratch 10 m is a 19 mm wide red cable marker tape supplied as a 10-metre roll, designed to provide visible identification and temporary labeling of cables, bundles and wiring routes. The tape adheres to cable sheaths and allows clear marking of routes and connection points for installers, maintenance teams and network technicians. The red colour improves visibility in racks and conduits while the scratch-off surface supports short-term writable or removable markings.

Advantages

The tape combines a narrow 19 mm width with a 10 m roll length to cover multiple runs without excessive waste. Its adhesive backing is formulated to stick reliably to common cable jackets while remaining removable when necessary. The red colour gives high contrast against dark cable sheaths and the surface is suitable for pen or pencil annotations and for temporary scratch-off marking methods. The roll format is compact for transport and storage on site.

Suitable for

• Temporary identification of network and power cables during installation
• Marking cable bundles and trunking for maintenance and troubleshooting
• On-site labelling where visible, removable colour coding is required
• Short-term route marking in server rooms, telecom closets and industrial enclosures

Key specifications

• Colour: red
• Width: 19 mm
• Length: 10 m per roll
• Adhesive backing suitable for common cable jackets
• Writable/scratch-off surface for temporary markings

How to use

Clean the cable surface of dust, oil or moisture before applying the tape to ensure proper adhesion. Cut or tear the required length from the roll, wrap the tape snugly around the cable or bundle with slight overlap and press firmly to engage the adhesive. For temporary annotations use a suitable pen, pencil or scratch tool on the tape surface. To remove, peel the tape back slowly from one end; if residue remains, clean with a mild solvent compatible with the cable jacket.

Recommendations

Store the roll in a dry, cool place away from direct sunlight to maintain adhesive performance. For long-term identification consider using more permanent labelling products; use Patchsee ECO-Scratch for temporary or changeable markings only.