Cinta de papel de protección Tesa Maler Krepp 4322, 38 mm x 50 m, muy rizada, adherencia muy alta

Tesa Maler Krepp 4322 is a strongly creped masking paper tape with dimensions of 38 mm x 50 m and very high tack adhesive. The tape combines a flexible creped paper backing with a pressure-sensitive adhesive formulated for secure edge definition and reliable adhesion to a variety of surfaces during painting and surface protection tasks. It is supplied as a single roll suitable for both professional and DIY use, offering stretch and conformability for curved profiles while enabling clean removal when work is complete.

Advantages

The strongly creped backing provides enhanced flexibility and stretch, allowing the tape to follow curved and uneven surfaces without lifting. The very high tack adhesive ensures firm adhesion to walls, woodwork and trim, reducing seepage and minimizing paint bleed. The tape removes cleanly from most painted and unpainted substrates when removed within the recommended time, leaving minimal residue. Its 38 mm width and 50 m length balance manageability and coverage for small to medium painting tasks.

Suitable for

• Masking edges for interior and exterior painting
• Protecting woodwork, trim and moldings during painting
• Applying to slightly curved or textured surfaces
• Temporary holding or bundling of lightweight materials during renovations

Key specifications

• Backing material: strongly creped paper for stretch and conformability
• Adhesive type: very high tack pressure-sensitive adhesive
• Width: 38 mm
• Length: 50 m per roll
• Typical removal: clean removal if removed within recommended time and from compatible surfaces

How to use

Ensure the surface is clean, dry and free of dust, grease or loose paint before application. Unroll the tape and apply it by pressing the creped paper firmly along the edge to be masked, smoothing by hand or with a tool to ensure full contact of the adhesive. For curved profiles, stretch the creped backing gently to conform to the shape while avoiding over-stretching. After painting, allow paint to dry to the manufacturer’s recommended tack level and remove the tape by pulling back on itself at a low angle to reduce the chance of paint lifting.

Lietošanas ieteikumi

For best results, test the tape on a small inconspicuous area first to confirm compatibility with the surface and paint. Do not leave the tape in place longer than recommended by the paint manufacturer, particularly on delicate or freshly painted surfaces.